LED Blink Patterns

Your IZON camera uses its LED to indicate the camera's current status. The blinking patterns may be influenced by whether or not the camera has been or is currently activated and connected to a Stem account.

Select a blink pattern for more information:

If your camera's LED is solid orange, read Solid Orange LED.

"Factory Settings" indicates the camera is ready to be activated. When powering a camera, please wait 2 mins for the LED blink pattern to stabilize.

Please read Firmware Compatibility for more information on activating your IZON camera.

Possible LED Blink Patterns

Alternating Orange and Green
  This Blink pattern is reserved for IZON 1.x cameras with factory settings.

Blinking Orange
Camera:  New from box
  IZON 2.x with factory settings
  Used, Activation Status Unknown
  Possible indications:
  IZON 2.x with factory settings
  IZON is configured for an unavailable WiFi network. Requires reset to use
  Registered with a Stem Account
  Indicates loss of Wi-Fi connectivity. Check your router's internet connection, power, and confirm the Wi-Fi configuration has not changed. Power cycle the camera and router. 

Blinking Green
Camera:  New from box
  Reset IZON to activate
  Used, Activation Status Unknown
  IZON has Wi-Fi connectivity, but is not associated with a Stem account. Requires reset to use
  Registered with a Stem Account
  Periodic Green Blink:
  Indicates remote connectivity issues. See Troubleshooting issues with Live View for help resolving poor connectivity.
  Continuous Green Blink:
  Indicates remote connectivity issues. Power cycle the camera. May need to reset the camera and add again.

Orange-Orange-Green-Green
  This Blink pattern is reserved for IZON 3.x cameras with factory settings.

 

Have More Questions? Submit a request
Powered by Zendesk